When people initially choose a superior-quality stamped concrete product, repair work is seldom, if ever, needed. If you had an inferior product applied or it has been a long time since you had any concrete surface maintenance done, you might need some professional help. Fortunately, repairing surface imperfections is what using SunRestore is all about. Instead of having a surface ripped out and re-poured, you can opt for stamped concrete repair.
The process used for stamped concrete repair at your Clarksville home depends on the cause and severity. Cracks are the most common issue. If caught early, a professional contractor or installer can fix them. For severe cracks, resurfacing with a product like Classic Texture transforms both the appearance and functionality of the surface.
On occasion, crusting or ridges appear after installing stamped concrete. Referred to as “squeeze,” this consists of material that pushes up between the stamp imprints. There are several possible causes. As an example, there is too much moisture on the surface or the tools used had multiple edges or did not fit the stamped mat tightly enough. The expert would start by looking at these three possibilities, and these ridges can have a tendency to chip away and degrade.
You might also need stamped concrete repair if the sealer is worn away and the concrete is deteriorating. Not only are these areas unsightly, they are also painful to walk on due to their abrasiveness. Make sure you let the installer know the level of smoothness you want on the surface before application. As for stamped concrete repair, a Sundek expert can recommend a variety of surfaces to choose from.
If you notice a lot of scaling on your decorative concrete surface, either the concrete cured while temperatures were too cold or the contractor did not complete the job correctly. Both problems show inexperience in the application process. A reputable installer in Clarksville can handle the original application, as well as any stamped concrete repair needs using SunRestore.